Wood Coatings - PaintecPaintec
http://www.paintec.co.za/wp-content/uploads/2018/07/natural-has-never-looked-this-good-slider-1.png

Wood Coatings


Designed to enhance, protect and prolong the life of your wood.

Paintec offers a full range of high performance wood coatings, stains, abrasives, fillers and spraying painting equipment.

We pride ourselves on top technical service, great colour matching facilities and offering quick turnaround times to the greater Natal region.

 
 

Light Fast Stains


A solvent based stain suitable for hand application.

Formulated with transparent iron oxides to provide an attractive colour that is UV resistant.

  • Pack sizes available: 1L, 5L & 25L
  • Touch dry:15 – 30 minutes @ 23°C
  • Coverage: Approximately 6 – 8m2 per 1 litre dependent upon the porosity of timber.

 
 

UV Water Based Stains


A range of water-based stains suitable for hand, spray or dip application.

Formulated for colour fastness / UV resistance this range offers an almost endless range of unique colours.

  • Pack sizes available: 1L, 5L and 20L
  • Touch dry: 10-20 mins minimum @ 23°C.
  • Overcoat: 2 hours minimum @ 23°C.
  • Coverage: Approximately 6 – 8m2 per 1 litre dependent upon the porosity of timber.

 
 

Single Coat Oil-Based Wood Stains


A range of oil-based stains suitable for hand application.

  • Pack sizes available: 250ml, 1L, & 5L
  • Touch dry: 20-30 mins minimum @ 23°C.
  • Overcoat:24 hours minimum @ 23°C.
  • Coverage: Approximately 50m2 per 1 litre dependent upon the porosity of timber.

 
 

Patinas


A range of solvent based stains suitable for hand, spray or dip application.

Formulated to achieve authentic aged / distressed effect.

For best results a light removal of the Patina is required using a rag or sand paper prior to over coating.

  • Pack sizes available: 1L, 5L & 25L
  • Touch dry: 1 minutes
  • Overcoat: 5 - 10 minutes
  • Coverage: Approximately 5 – 6m2 per 1 litre dependent upon the porosity of timber.

 
 

Polyurethane Coatings (PU)


A range of twin pack solvent based coatings for spray application.

Offers a Fast curing, Easy to use with outstanding resistance to abrasion, heat, chemical resistance.

Formulated

  • Pack sizes available: 5L & 25L
  • Touch dry: 25 – 30mins @ 23°C.
  • Sandable: 60 - 90 mins @ 18°C.
  • Recoatable: 2-3 hrs mins minimum @ 23°C
  • Packing: 24 hrs / Overnight minimum
  • Coverage: Approximately 6 - 7m2 per 1 litre dependent upon the porosity of timber
  • Typical Finish: 1-3 coats depending on timber & require finish.
  • Available Gloss Levels:
    • 0 - 5% Natural Effect
    • 10% Matt
    • 20% Velvet Satin
    • 40% Sheen
    • 80 - 90% Gloss

 
 

Acid Catalysed Lacquer (AC)


A range of twin pack solvent based coatings for spray application.

Formulated in clear, white & tint to any colour this range is Fast curing, Easy to use with outstanding abrasion resistance to abrasion, heat, chemical resistance.

  • Pack sizes available: 5L & 25L
  • Touch dry: 25 – 30mins @ 23°C.
  • Sandable: 60 - 90 mins @ 18°C.
  • Recoatable: 2-3 hrs mins minimum @ 23°C
  • Packing: 24 hrs / Overnight minimum
  • Coverage: Approximately 6 - 7m2 per 1 litre dependent upon the porosity of timber
  • Typical Finish: 1-3 coats depending on timber & require finish.
  • Available Gloss Levels:
    • 0 - 5% Natural Effect
    • 10% Matt
    • 20% Velvet Satin
    • 40% Sheen
    • 80 - 90% Gloss

 
 

Nitrocellulose Lacquer (NC)


A range of single pack solvent based lacquers hand, spray or dip application.

Formulated for quick drying, easy application

  • Pack sizes available: 5L & 25L
  • Touch dry: 25 – 30mins @ 23°C.
  • Sandable: 60 - 90 mins @ 18°C.
  • Recoatable: 2-3 hrs mins minimum @ 23°C
  • Packing: 24 hrs / Overnight minimum
  • Coverage: Approximately 6 - 7m2 per 1 litre dependent upon the porosity of timber
  • Typical Finish: 1-3 coats depending on timber & require finish.

 
 

Water Based Lacquer


A range of single pack water-based lacquers suitable for hand, spray or dip application.

  • Pack sizes available: 5L & 25L
  • Touch dry: 25 – 30mins @ 23°C.
  • Sandable: 60 - 90 mins @ 18°C.
  • Recoatable: 2-3 hrs mins minimum @ 23°C
  • Packing: 24 hrs / Overnight minimum
  • Coverage: Approximately 6 - 7m2 per 1 litre dependent upon the porosity of timber
  • Typical Finish: 1-3 coats depending on timber & require finish.